BRUN DE CASSEL D'ITALIE
Brun de Cassel d'Italie is an earth which comes from the Vérone area (Italie). This earth was originally harvested in peat or lignite deposits. Because of its poor resistance to light it was replaced in the nineteenth century by pigments based on calcined oxides.
This pigment is 100% natural.
Legal notices
Delivery policy
Return policy
Google reviews
Uses : lime paint, lime coating, wax, paint, plaster, fresco, glaze, cement, fine arts, flour paint.
This pigment is in powder. For use in artistic painting, it should be ground finely in a mortar before mixing it with the binder.
Brun de Cassel d'Italie mixed with linseed oil
Linseed oil : dissolve the powder in a little bit of turpentine before adding it to the linseed oil.
Water-based paint/fatty lime : dilute the pigment in some water to make it liquid before incorporating it into the paint.
Lime powder/cement/plaster : directly incorporate the pigment (up to 10% based on the weight of the binder), then mix in order to stain all of your binder.
Maximum dosage : The maximum dosage is 10% compared to the binder used. Above 10% it is recommended to incorporate fixators and adjuvant (lime use).
Photo on the left : the pigment is mixed in the Badisof Plus (limewash ready to use which you can find in our deco range) at the rate of 5% so 50g of pigment per kilo of whitewash.
Photo on the right : the pigment is mixed in the Badisof Plus at the rate of 20% so 200g per kilo of whitewash.
These renderings can be similar for any white base mixed with this pigment. However, differences could be possible for the use of paints more or less loaded with titanium dioxide (white pigment), which will give a final color more or less light. If you want to lighten a pigment, before coloring a transparent binder (linseed oil, wax, acryling binder, caparol, flour, etc), you can mix it with blanc Tiona (= white Tiona).
Color : gray brown pulling toward black with a transparent binder. Medium gray very slightly brown colored with a white binder.
This pigment is 100% natural.
Made in France.
History : this earth, which comes from the Verone area (Italy), was originally harvested in peat or lignite deposits. Because of its poor resistance to light it was replaced in the nineteenth century by pigments based on calcined oxides.
_____________________
Our packaging :
We use recyclable PET jars, to throw away, cleaned, in the yellow bins ; and glass jar that you can clean and sterilize for other uses even for food storage.
Data sheet
- Origin
- Italy
- Chemical name
- Mixture of natural oxides and carbon oxides
- Color Index
- Br7
- Bulk density
- 814 g/l
- UV resistance
- Good
- Colouring power
- Good